SABIC® LLDPE M200024T
SABIC® LLDPE M200024T is a linear low-density polyethylene grade developed for injection-molding applications. It offers good flow, low-temperature toughness, stress crack resistance, and high gloss.
SABIC® | LLDPE Injection Molding Grade | MFR = 20 g/10 min at 190°C / 2.16 kg
Description
SABIC® LLDPE M200024T is a linear low-density polyethylene grade developed for injection-molding applications. Its high melt flow supports efficient mold filling and the production of detailed molded parts.
The grade provides a useful balance of flow, low-temperature toughness, environmental stress crack resistance, and surface gloss.
Key Characteristics
Applications
- Household products
- Trash cans
- Lids for large industrial containers
- Selected automotive parts
- Masterbatch production
- Polymer compounding
Typical Property Values
The following values represent the supplied technical properties of SABIC® LLDPE M200024T.
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Polymer Properties | |||
| Melt Mass-Flow Rate at 190°C / 2.16 kg | 20 | g/10 min | ASTM D1238 |
| Density at 23°C | 924 | kg/m³ | ASTM D1505 |
| Mechanical Properties | |||
| Tensile Stress at Yield | 10 | MPa | ASTM D638 |
| Tensile Stress at Break | 12 | MPa | ASTM D638 |
| Tensile Strain at Break | > 500 | % | ASTM D638 |
| Izod Impact Strength, Unnotched at 23°C | 500 | J/m | ASTM D256 |
| Thermal Properties | |||
| Vicat Softening Temperature, Rate B/50 | 92 | °C | ASTM D1525 |
| Brittleness Temperature | < −75 | °C | ASTM D746 |
Technical values are based on the supplied grade data and are provided for reference only. Final specifications should be confirmed through the latest applicable TDS and COA before purchase.
Processing Conditions
Processing conditions should be adjusted according to machine design, mold geometry, part thickness, cycle time, and finished-product requirements.
Storage and Handling
Store the resin in a clean, dry, and well-ventilated area protected from direct sunlight, moisture, contamination, and excessive heat.
Keep the material in its original sealed packaging until use and follow the latest manufacturer storage and handling instructions for the supplied batch.