SABIC® LLDPE M500026T
SABIC® LLDPE M500026T is a high-flow linear low-density polyethylene grade developed for injection-molding applications requiring good low-temperature toughness, stress crack resistance, and surface gloss.
SABIC® | LLDPE Injection Molding Grade | MFR = 50 g/10 min at 190°C / 2.16 kg
Description
SABIC® LLDPE M500026T is a linear low-density polyethylene grade with a narrow molecular weight distribution, suitable for injection-molding applications.
The grade is designed to provide excellent flow properties together with good low-temperature toughness, environmental stress crack resistance, and surface gloss.
Key Characteristics
Typical Property Values
The following values represent the supplied technical properties for SABIC® LLDPE M500026T.
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Polymer Properties | |||
| Density | 926 | kg/m³ | ASTM D1505 |
| Melt Mass-Flow Rate at 190°C / 2.16 kg | 50 | g/10 min | ASTM D1238 |
| Mechanical Properties | |||
| Flexural Strength | 9 | MPa | ASTM D790 |
| Flexural Modulus, 1% Secant | 200 | MPa | ASTM D790, Procedure A |
| Izod Impact Strength | 500 | J/m | ASTM D256 |
| Shore D Hardness | 50 | — | ASTM D2240 |
| ESCR, 10% Igepal, F50 | 3 | h | ASTM D1693, Condition B |
| ESCR, 100% Igepal, F50 | 6 | h | ASTM D1693, Condition B |
| Tensile Stress at Yield, 50 mm/min | 10 | MPa | ISO 527-2, Type 1A |
| Tensile Stress at Break, 5 mm/min | 12 | MPa | ISO 527-2, Type 1A |
| Tensile Strain at Break, 5 mm/min | > 100 | % | ISO 527-2, Type 1A |
| Thermal Properties | |||
| Vicat Softening Temperature | 88 | °C | ASTM D1525 |
| Brittleness Temperature | < −75 | °C | ASTM D746 |
Technical values are based on the supplied grade data and are provided for reference only. Final product specifications should be confirmed through the latest applicable TDS and COA before purchase.
Processing Conditions
Processing conditions should be adjusted according to machine design, mold geometry, part thickness, cycle time, and finished-product requirements.
Food-Contact Applications
Food-contact suitability should be confirmed through the latest grade-specific regulatory documentation for the intended market and finished application.
Storage and Handling
Store the resin in a clean, dry, and well-ventilated area protected from direct sunlight, moisture, contamination, and excessive heat.
Keep the product in its original sealed packaging until use and follow the latest manufacturer storage and handling instructions for the supplied batch.